Questions? Feedback? powered by Olark live chat software
Equipment Watch
Log In
My
EQW
Cart
Welcome, Guest
 
Have an account?
Category
Manufacturer
Model
Search In
My Products
equipment image
Case 430 (disc. 2008)
Skid Steer Loaders

Size Class:
Sae Operating Load 1751 - 2200 lbs
Weight:
6,718 lbs.
See more data for this model:
Rental Rate Blue Book
Custom Cost Evaluator
AED Green Book
Green Guide
Last Bid
Serial Number Guide

Specifications

BUCKET & LOADER
Bucket Capacity - Heaped 15.2
Bucket Range (Capacity) 13.2 - 27.9 cft
Bucket Type Foundry/Excavating
Bucket Width 66 in
ENGINE
Engine Manufacturer Case
Engine 445/M2
Net Horsepower 74 hp
Power Mode Diesel
Gross HP 80
Displacement 274
Cylinders 4
Rated RPM 2,300
Engine Torque @ RPM 236 @ 1400 rpm
Cooling (Liquid/Air) Liquid
TRANSMISSION
Transmission Hydrostatic
Number of Speeds Variable
Travel Speed 7 mph
HYDRAULICS
Hydraulic Pump Type Gear
Hydraulic Pump Flow (Standard) 21.9 gpm
Hydraulic Pump Flow (Hi-Flow) 32.6 gpm
Relief Pressure (Std Flow) 3,050 psi
Relief Pressure (Hi-Flow) 3,000 psi
PERFORMANCE
Lift Arm Breakout Force 4,304 lbs
Tilt Breakout Force 5,784
Cycle Time (Raise) 4.1 sec
Cycle Time (Dump) 1.9 sec
Cycle Time (Lower) 2.6 sec
Cycle Time (Retract) 1.7 sec
Total Cycle Time 10.3 sec
Operating Capacity (SAE) 2,000 lbs
Tipping Load (SAE) 4,000 lbs
TIRES
Tire Size 12.00 X 16.5
WEIGHTS & DIMENSIONS
Operating Weight 6,718 lbs
Height to ROPS 76.7 in
Height to Hinge Pin 121.5 in
Length Less Bucket 103.9 in
Length With Bucket (Dig/Carry) 127.2 in
Width Less Bucket 64 in
Clearance Circle Front (w/Bkt) 76.7 in
Clearance Circle Rear 59.1 in
Angle of Departure 28 deg
Dump Height 96.6 in
Dump Angle 39 deg
Dump Reach 21.3 in
Maximum Operating Height 152.4 in
Ground Clearance 9 in
Bucket Rollback (Groundline) 32 deg
Bucket Rollback (Carry) N/A
Bucket Rollback (Full Height) 84 deg
Tread Width 52.6 in
Wheelbase 43.1 in
FLUID CAPACITIES
Fuel Tank Capacity 22 gal
Hydraulic Tank Capacity 7.1 gal
Hydraulic System Capacity 13.2 gal
OPERATOR ENVIRONMENT
Operator Protection ROPS/FOPS
All material herein Copyright © 2003-2014 Penton All Rights reserved. | 6.15.0B